Electrician in Kingston upon Thamescovering KT1 and KT2
JMO Electrical is based on Roffey Close in Purley, a run across the river and up the A3 or through Epsom to reach Kingston, so most jobs are booked as a planned visit rather than an on-the-spot call. Fault finding, rewires and consumer unit upgrades are all covered, with a written quote before anything starts.
NAPIT registered, £2 million insured, 10/10 on Checkatrade, 320 reviews logged over the years, one year workmanship guarantee, covering Kingston upon Thames by appointment.
NAPIT registered
Government-approved competent person scheme
Part P registered
Domestic work certified to Building Regulations
£2 million cover
Public liability insurance on every job
1 year guarantee
Workmanship guaranteed for twelve months
10/10 on Checkatrade
320 reviews logged on the profile over the years
Local to Kingston upon Thames
Why a Kingston upon Thames electrician makes a difference
Riverside flats, Victorian terraces and a dense town centre of shops and offices. Domestic rewires and commercial periodic reports both feature heavily across KT1 and KT2.
A short drive rather than a local patch
Kingston is not on JMO's doorstep the way Purley or Coulsdon is, so the honest picture is a scheduled visit rather than a five-minute dash. Jon regularly works this side of Surrey and south-west London, and planned jobs, quotes and return visits for testing are timed to make one trip do the work of several.
For genuine emergencies in KT1 and KT2, the call-out is still 24/7, but response time will reflect the road distance from Purley via the A217 and A3 rather than a Purley-side eta. Jon will always give a realistic time on the phone before you commit.
Property types across Kingston
Kingston town centre and the riverside around Canbury Gardens have a dense mix of Victorian terraces, mansion flats and newer riverside apartment blocks, many converted or split into flats over the decades with electrics from several different eras stacked on top of each other.
Further out towards Coombe, Norbiton and the Kingston Hill area, the housing opens into larger Edwardian and inter-war detached and semi-detached houses, often with long rear gardens, garages and driveways, which is where consumer unit upgrades, EV chargers and outbuilding power come up most.
What Kingston households and landlords call us out for
EICRs ahead of a sale or remortgage are common here given how much of the KT1/KT2 stock has changed hands or been converted into flats, alongside fault finding on tripping RCDs in older conversions where circuits have been added piecemeal over the years.
Landlords with buy-to-lets near the university and the town centre regularly need safety certificates and PAT testing turned around promptly between tenancies, and driveway EV chargers are a growing job on the larger Coombe and Kingston Hill properties.
Services
Electrical services available in Kingston upon Thames
Every job tested, certified and guaranteed for twelve months. Click through for full detail on any service.
EICR & periodic reports in Kingston upon Thames
Condition reports for Kingston sales, remortgages and rental compliance, booked as a planned visit.
Fault finding in Kingston upon Thames
Tripping RCDs and dead circuits traced properly in converted flats and older houses alike; £85 covers the visit and first hour in standard hours.
Consumer unit upgrades in Kingston upon Thames
Modern RCBO boards fitted in Victorian terraces and Edwardian houses across KT1 and KT2, all circuits tested afterwards.
House rewires in Kingston upon Thames
Full and partial rewires for period conversions near the town centre and larger houses towards Coombe.
Landlord safety certificates in Kingston upon Thames
Certificates turned around promptly for Kingston rentals between tenants, with access arranged directly.
PAT testing in Kingston upon Thames
Portable appliance testing for landlords and small businesses around the town centre and the market.
EV charger installation in Kingston upon Thames
Driveway charge points on the larger Kingston Hill and Coombe properties, sized to the existing supply.
Extra sockets & lighting in Kingston upon Thames
Sockets and downlights added during renovations, common in the riverside flat conversions.
Garden, garage & outbuilding power in Kingston upon Thames
Armoured supplies to garages and garden offices on the larger plots further from the town centre.
Emergency call-outs in Kingston upon Thames
24/7 cover for dangerous faults and loss of power, with a realistic travel time given upfront over the phone.
Why JMO
Why customers in Kingston upon Thames call Jon
Concrete reasons, not slogans.
Honest about distance
Kingston is a drive from Purley, not a doorstep job, so Jon plans visits properly rather than promising a local eta he can't keep.
Experience across property types
Fifteen years covering everything from Victorian terraces to riverside conversions and Edwardian family homes.
10/10 on Checkatrade
320 reviews logged over the years, including jobs across south-west London and Surrey.
NAPIT and Part P registered
Domestic work certified and notified to Building Regulations, paperwork issued promptly.
Clear pricing
Free quotes on planned work, £85 in standard hours covering the first hour of fault finding, £140 per hour out of hours.
Guaranteed work
Twelve months on all workmanship, £2 million public liability cover on every job.
Local issues
Electrical problems we see most in Kingston upon Thames
Property age, building fabric, weather and infrastructure all shape what goes wrong here.
Flat conversions with mixed-era wiring
A lot of Kingston's Victorian and Edwardian terraced stock, especially near the town centre and towards Norbiton station, has been split into flats at different points over the last sixty years. Each conversion tends to leave its own layer of wiring behind, so a single building can have three or four distinct standards of installation feeding different flats.
- Shared supplies never properly separated between flats
- Old fuse boards left in place under a newer consumer unit downstream
- Lighting circuits with no earth continuity in the oldest sections
- Bathroom and kitchen circuits added without correct zoning or RCD protection
Riverside flats and damp-prone locations
Properties close to the Thames around Canbury Gardens and the riverside walk can suffer from damp affecting cables and accessories at low level, particularly in older ground-floor flats. Corrosion at socket terminals and consumer units sited in damp cupboards under stairs are a recurring finding on EICRs in this area.
Where that turns up, the fix is usually relocating the board to a drier position and replacing affected cable runs, not just swapping the accessory and hoping.
Larger houses towards Coombe and Kingston Hill
The bigger detached and semi-detached houses on this side of Kingston often have extensive rear gardens, double garages and, increasingly, home offices or annexes. These are exactly the installations where an undersized board or an unprotected outbuilding supply becomes obvious the moment an EV charger or extra circuit is added.
- Boards with no spare ways for an EV charger or additional circuit
- Outbuilding supplies run in twin and earth rather than armoured cable
- No local isolation at garages, home offices or garden rooms
Rental turnover near the university and town centre
With a large student and young professional rental market close to Kingston University and the town centre, landlords here churn tenancies quickly, and safety paperwork can lapse in the gap between certificates and the next let. EICRs, PAT testing and repeat annual checks are booked well ahead of renewal dates to avoid a compliance gap.
Our process
How a job in your area runs
The same five steps on every job, domestic or commercial.
01
Call or send the form
Tell Jon what the job is and where. Planned work gets a free quote; urgent faults get triage advice on the phone straight away.
02
Visit and assessment
Jon attends, checks the board, earthing and the circuits involved, and establishes what the property actually needs rather than what is easiest to sell.
03
Written price before work starts
A clear scope and price in writing. Free for planned work; fault finding is £85 in standard hours covering the first hour, £140 per hour evenings and weekends.
04
Work carried out to BS 7671
Installed tidily, dust controlled, floors protected, and scheduled around your household or trading hours where that matters.
05
Testing, certification and guarantee
Every circuit tested, certification issued, domestic work notified under Part P through NAPIT, and twelve months' workmanship guarantee.
Reviews
Verified Checkatrade feedback
10/10
“Communications and arranging the date was excellent. Standard of work to a high standard and all to the agreed quotation.”
10/10
“Jon and his team turned up promptly as agreed, completed all works to a high standard and at a reasonable price.”
10/10
“Quickly turned up and safely dealt with cut cable to external garage. Great communication throughout.”
Questions
Electrician in Kingston upon Thames: FAQs
Are you based in Kingston upon Thames?
No, JMO Electrical is based in Purley. Kingston is covered by appointment, with planned visits for quotes, installations and testing rather than an on-the-spot local response.
How quickly can you get to Kingston in an emergency?
Emergency call-outs are 24/7, but Kingston is a drive from Purley via the A217 or A3, so Jon will give you a realistic time on the phone rather than a Purley-side estimate.
How much does an electrician cost in Kingston?
Planned work is quoted free and in writing. Fault finding is £85 during standard hours of 8:00am to 5:30pm, covering the call-out and the first hour, with evenings and weekends at £140 per hour.
Do you carry out EICRs in Kingston for sales or lettings?
Yes, EICRs are a regular booking for KT1 and KT2 sales, remortgages and rental compliance, arranged as a planned visit.
Can you fit an EV charger at a Kingston property?
Yes. The existing supply, main fuse and board condition are checked first so the charge rate quoted is one the property can actually support.
Do you work on flat conversions?
Yes, including Victorian and Edwardian conversions near the town centre where several eras of wiring can exist in one building.
Do I get certification for the work?
Yes. Work is tested to BS 7671, certified, and domestic work is notified under Part P through our NAPIT registration.
Do you work with Kingston landlords?
Yes: EICRs, PAT testing and landlord safety certificates, turned around promptly between tenancies near the university and town centre.
Is the work guaranteed?
All workmanship carries a one year guarantee, and JMO Electrical holds £2 million public liability insurance.
Which nearby areas do you also cover?
Wimbledon, Epsom, Sutton, Leatherhead and the wider Surrey and south-west London area.
Nearby
Other areas we cover
Not sure we reach you? See what we do, browse all services or get in touch and Jon will tell you straight away.
Kingston upon Thames covered by appointment
Call Jon or send the form. Free written quotes on planned work, 24/7 emergency cover with an honest travel estimate, and everything certified and guaranteed.